Latest Products
-
HSS END MILL SHELLS – R.H CUTTING – INCHES
-
The WHA/WHB/WHC series of weatherprotected isolating switches is a robust range of switches suitable for virtually any external application. The impact resistant base and cover will survive the hardest knocks in almost any installation. The two sections are sealed with a co-injection gasket. The range provides ample conduit entries and is suitable for side entry from a vertical duct. Its compact size means it is aesthetically pleasing and suits installations where space is limited such as with residential air conditioning applications
Key Features
- 1 gang Isolating switch
- 1 way, on/off switch
- 8 mm diameter padlocking facility
- M220 rating
- Dimension: 85 mm Height x 165 mm Width x 94 mm Depth
- Cables looped in and out from overhead
- In and out from underground
- In and out straight through the switch
- Cables in through side and out through bottom
- Two 25mm rear knockouts are moulded in the base
-
AD22-DFM Digital Frequency/Current/Voltage Meter designed on the base of AD22 LED LED Indicators in this field. It can be used in the Panel Board to showing the rated frequency in the circuit. The AD22-DFM Digital Frequency/Current/Voltage Meter Indicator also can be used to instead of the traditional Panel Meter. This Indicator with the advantage of compact design. It can be easily installed on the panel board.
-
Luminous Solar Charge controllers are required to fully charge a battery from Solar Panels without permitting overcharge. They prevent reverse current flow at night.
Brief Specification:
- 98% efficiency
- Inbuilt Low volatge disconnect (LVD)
- Automatic battery selection
- USB port for DC load connection
-
46-piece Screwdriver Set is ideally equipped to handle all common screwdriving tasks
-
Complete bit set with durable screwdriver bits and a selection of nutsetters fits the most common screw types and sizes
-
Perfect for completing an extended variety of DIY fixing jobs
-
-
ASBESTOS BRAIDED SQUARE PACKING LUBRICATED & GRAPHITED – P203
-
Rotary isolators are used to switch power to commercial / light industrial applications.
The Rotary Isolator is enclosed and constructed from a tough flame retardant material, making it suitable for internal and external applications. The unit is fitted with several 22mm gland knockouts and Earth and Neutral bars. There is ample internal space for cable installation and the handle can padlocked for extra security.
Rotary Isolator Construction & Features:-
• Enclosed Rotary Isolators
• 3 Pole, 100A
• Constructed from tough flame retardant material
• Suitable for internal and external applications, fitted with several 22mm Gland Knock Outs
• Earth and Neutral Bars fitted
• Ample internal space for cable installation
• Padlock-able handle