Product Description
GV2ME Motor Protector Thermal Magnetic Type MPCB, 3 Phase Motor Protection Circuit Breaker
GV2ME series motor protection circuit breaker are mainly used for the overload and short circuit protection of the motor in AC 50/60Hz, up to 660V, 0.1-80A power circuit, as a full-voltage starter to start and cut off the motor, under the AC3 load or for the overload and short circuit protection of the circuit and power equipment in the power distribution network.
Be the first to review “GV2ME Motor Protector Thermal Magnetic Type MPCB, 3 Phase Motor Protection Circuit Breaker”
Previous Product
DDS13521A Single-Phase DIN Rail kWh Energy Meter
Next Product
DOL Motor Starter, 690 Vac, 3Ph, IP65
Related products
-
Sold By: : August Auto Agencies Ltd.
ampsebs1c series poles 3,4
Coil Amps 9,12,18,25,32,40,50,65,80,95,etc
with 1NO & 1NC Auxiliary contuct
-
Sold By: : August Auto Agencies Ltd.AC Contactor
Function
AC contactor mainly applies to the circuit of AC 50/60Hz, and rated insulation voltage 660V rated operating voltage up to 690V. When used in AC-3, and rated operational voltage 380V and rated current up to 9A, for long distance breaking circuit and frequency starting or control the motor.
Technical Parameter
Model Name
EBS1C Mechanical chain contactors
Standard
IEC60947-4 SEMKO
Poles
3P 4P
Rated current In(A)
9 12 18 25 32 40 50 65 80 95Amp
Rated voltage Un(V)
230V 240V 380V
Frequency of coil
50Hz, 60Hz, 50/60Hz
Number of auxiliary contacts
10 /01 /11
Mechanical life (times)
10000000
Protection grade
IP20
Features
n This EBS1C AC contactor with a clear dust cover for protection and more pretty.
n Combined with the auxiliary contact block, timer delay and mechanical interlocking device, etc, it becomes the delay contactor, mechanical interlocking contactor, star-delta starter
n With the thermal relay, it combined into the electromagnetic starter.
n Full set accessories
Auxiliary contact group Top hung/side hung
Time-delay auxiliary contact
Applicable Working
Ambient temperature
-5~+40℃, the average value cannot exceed to +35℃ within 24h
Altitude
≤2,000m
Relative humidity
≤95%
Pollution level
II.
Installation location
Mount on the place where has no obvious vibration or impact
Reviews
There are no reviews yet.