AD22-DAM Digital Current/ Voltage/ Hz Indicator
AD22-DFM Digital Frequency/Current/Voltage Meter designed on the base of AD22 LED LED Indicators in this field. It can be used in the Panel Board to showing the rated frequency in the circuit. The AD22-DFM Digital Frequency/Current/Voltage Meter Indicator also can be used to instead of the traditional Panel Meter. This Indicator with the advantage of compact design. It can be easily installed on the panel board.
Be the first to review “AD22-DAM Digital Current/ Voltage/ Hz Indicator” - Cancel quote
Related products
-
Read moreSold By: : August Auto Agencies Ltd.Product added! Browse Wishlist Browse WishlistThe product is already in the wishlist! Browse Wishlist Browse Wishlist
-
Solar Retrofit is an intelligent Charge controller and solar conversion device which when connected to any existing UPS converts it into 100% Solar UPS without any change in electrical wiring of existing UPS.
- Pure Sine Wave Output
- 3 Operation modes: Auto/Manual/100% solar
- MCB Protection
- 4 Stage Battery charging
- LCD Display
Solar Retrofit is an upgrade of Charge controllers which when connected to any existing UPS converts it into 100% Solar UPS without any change in electrical wiring of existing UPS. It has inbuilt intelligence to maximise use of solar energy to power your appliances.
Solar Optimization Technique
Luminous Solar Retrofit uses the Solar Optimization technique to extract minimum power from the mains and instead use solar energy to the maximum, for example if the battery is charged by only 70% till dusk the Solar Retrofit after analyzing the usage pattern will not charge the battery through the mains but will wait until dawn to do so, hence saving the electricity bill and optimizing the use of ecofriendly solar energy.
LCD Display
A user friendly LCD that displays important information like battery Charging Status, Charging Source, Total units savings etc.
MCB Protection
World class MCB ensures your UPS and connected loads stay protected from short circuits.
Four Stage Charging
The Solar Retrofit supports 4-stage smart charging to ensure fast, safe & efficient charging and longer battery life.
Products Retrofits and Charge Controllers Max usable current per MPPT (A) No Nominal battery bank voltage No Max usable current from solar (A) No Usable current from grid (A) No Grid Connection No Nominal DC 96 Max DC Output Current (Amp.) 50 Product Dimensions (L*W*H) 375*315*135 No. of 12V Batteries in Series 8 Read moreSold By: : August Auto Agencies Ltd.Product added! Browse Wishlist Browse WishlistThe product is already in the wishlist! Browse Wishlist Browse Wishlist
-
DDS13521A single-phase DIN rail type energy meter is a new type single-phase full-electronic energy meter developed by our company using microelectronic technology and imported special large-scale integrated circuits, applying digital sampling processing technology and SMT process and other advanced technologies. The performance of this meter fully complies with the relevant technical requirements of the 0.5 or 1 level single-phase energy meter in the national standard of GB/T17215-2002. It can directly and accurately measure the active energy in the single-phase AC power grid with a rated frequency of 50Hz or 60Hz. The mechanical counter shows the total power consumption: it has the characteristics of good reliability, small size, light weight, beautiful appearance and easy installation.Read moreSold By: : August Auto Agencies Ltd.Product added! Browse Wishlist Browse WishlistThe product is already in the wishlist! Browse Wishlist Browse Wishlist
-
Digital Time Relay – HC18A – 7 Days with 15 Different Combinations with BatteryContact Capacity: AC250V 12AFull Timing Rang: 20mInsulation Risistence: ≥100mΩCoil Voltage: 110,220V ACElectrial Life: 105 timesMechanical Life: 107tinmesContact Resistance: ≤ 2/dayInsulation Resistance: AC 220V 50/60Hz 85%-100%Operating Temperature: 0°c − +40°cMinimum Setting Unit: 0.5 MinutesRead moreSold By: : August Auto Agencies Ltd.Product added! Browse Wishlist Browse WishlistThe product is already in the wishlist! Browse Wishlist Browse Wishlist
-
Function
BRD Series thermal overload relays apply to circuit of AC 50Hz or 60Hz, rated voltage to below 660V and rated current 0.1~93A for AC Motor overload and single phase protection during long time or intermittent longtime service, which can also protect three phase serious imbalance and long starting time of motor or long time operation, can also be used for corresponding AC contactor for electromagnetic starter.
Model Name
protection relay Standard
IEC60947-4-1 Setting current multiple
1.05, 1.2, 1.5, 7.2 Rated current In(A)
25 36 93Amp Rated voltage Un(V)
230V 240V 380V Frequency of coil
50Hz, 60Hz, 50/60Hz Number of auxiliary contact
10 /01 /11 Protection grade
IP20 Pollution grade
3 Features
BRD has the innovative, elegant model and small installation area, functions such as temperature compensation, action indication, automatic and manual reset, stop with steady and reliable performance.
n Can be connected with a contactor or installed separately
n Action Characteristics
Overload protection
Phase failure protection
Applicable Working
Ambient temperature
-5~+40℃, the average value cannot exceed to +35℃within 24h Altitude
≤2,000m Relative humidity
≤95% Pollution level
II. Installation location
Mount on the place where has no obvious vibration or impact Read moreSold By: : August Auto Agencies Ltd.Product added! Browse Wishlist Browse WishlistThe product is already in the wishlist! Browse Wishlist Browse Wishlist
-
Read moreSold By: : August Auto Agencies Ltd.Product added! Browse Wishlist Browse WishlistThe product is already in the wishlist! Browse Wishlist Browse Wishlist
Reviews
There are no reviews yet.