Power Backup & Solar Products
-
- Sine Wave Inverter
- Capacity – 1500 VA, Rated Power – 1260 W
- 24 Month Warranty
- Supports two batteries
- India’s most intelligent Home UPS with 32 bit DSP Processor
- Safe for sensitive appliances with Sine wave out-put
- LED Display for status of Power back-up / battery charging time in Hours and Minute
- MCB for protection from Input mains
- Bypass switch for supplying output directly from grid in case of Home UPS fault
- Noiseless Operations with the help of low harmonic distortion
- Supports wide battery range, i.e. Flat Plate, Tubular & VRLA (SMF)
-
Solar Retrofit is an intelligent Charge controller and solar conversion device which when connected to any existing UPS converts it into 100% Solar UPS without any change in electrical wiring of existing UPS.
- Pure Sine Wave Output
- 3 Operation modes: Auto/Manual/100% solar
- MCB Protection
- 4 Stage Battery charging
- LCD Display
Solar Retrofit is an upgrade of Charge controllers which when connected to any existing UPS converts it into 100% Solar UPS without any change in electrical wiring of existing UPS. It has inbuilt intelligence to maximise use of solar energy to power your appliances.
Solar Optimization Technique
Luminous Solar Retrofit uses the Solar Optimization technique to extract minimum power from the mains and instead use solar energy to the maximum, for example if the battery is charged by only 70% till dusk the Solar Retrofit after analyzing the usage pattern will not charge the battery through the mains but will wait until dawn to do so, hence saving the electricity bill and optimizing the use of ecofriendly solar energy.
LCD Display
A user friendly LCD that displays important information like battery Charging Status, Charging Source, Total units savings etc.
MCB Protection
World class MCB ensures your UPS and connected loads stay protected from short circuits.
Four Stage Charging
The Solar Retrofit supports 4-stage smart charging to ensure fast, safe & efficient charging and longer battery life.
Products Retrofits and Charge Controllers Max usable current per MPPT (A) No Nominal battery bank voltage No Max usable current from solar (A) No Usable current from grid (A) No Grid Connection No Nominal DC 96 Max DC Output Current (Amp.) 50 Product Dimensions (L*W*H) 375*315*135 No. of 12V Batteries in Series 8
-
Solar Retrofit is an upgrade of Charge controllers which when connected to any existing UPS converts it into 100% Solar UPS without any change in electrical wiring of existing UPS. It has inbuilt intelligence to maximise use of solar energy to power your appliances.
-
Solar Retrofit is an upgrade of Charge controllers which when connected to any existing UPS converts it into 100% Solar UPS without any change in electrical wiring of existing UPS. It has inbuilt intelligence to maximise use of solar energy to power your appliances.
-
Luminous Solar Charge controllers are required to fully charge a battery from Solar Panels without permitting overcharge. They prevent reverse current flow at night.
Brief Specification:
- 98% efficiency
- Inbuilt Low volatge disconnect (LVD)
- Automatic battery selection
- USB port for DC load connection
-
Luminous Solar Charge controllers are required to fully charge a battery from Solar Panels without permitting overcharge. They prevent reverse current flow at night.
Brief Specification:
- 98% efficiency
- Inbuilt Low volatge disconnect (LVD)
- Automatic battery selection
- USB port for DC load connection
-
- 220 Ah Rated Capacity @ C10, 12V
- Warranty – 36* Months
- Tubular plate Technology – Next generation tall tubular battery with better charge acceptance and long Back up
- Long cycles (1500 @80% DOD, 5000 @ 20% DOD), ensuring design life
- Longer life without discharge with self-discharge rate of 3% per month STC.
- Efficient battery with Higher AH efficiency > 90%, and WH efficiency > 80%
- Low maintenance with a topping frequency of 8-10 months, low maintenance with level indicators
- Manufactured with high corrosion resistant and robust spine technology using the advanced and state-of-the-art ‘HADI’ high pressure (at 100 bar) spine casting machines, which ensure a super fine grain structure, for strength, long life and highest reliability
- Designed with thicker positive plates and 20% more electrolyte to withstand power outage
- It has high purity, corrosion-resistant proprietary spine alloy composition for long battery life
- Extra-strong, flexible oxidation-resistant gauntlet for better performance and long life
- Puncture-resistant polyethylene separator which minimize the possibility of internal short circuits.
-
Main Features
- 7.5AH to 200AH (12V)
- Sealed Batteries
- Maintenance Free
- Built for Inverters/UPS
-
Powers both AC and DC loads from the smart synergy of solar and grid energy