Let us know how we can assist.
Kombo Munyiri Road, Gikomba
+ 254 (0) 20 212 6797
Monday - Friday: 08.00-17.00 </br> Saturday: 09.00-12.30 </br> Sunday: closed
Solar Retrofit is an intelligent Charge controller and solar conversion device which when connected to any existing UPS converts it into 100% Solar UPS without any change in electrical wiring of existing UPS.
Solar Retrofit is an upgrade of Charge controllers which when connected to any existing UPS converts it into 100% Solar UPS without any change in electrical wiring of existing UPS. It has inbuilt intelligence to maximise use of solar energy to power your appliances.
Solar Optimization Technique
Luminous Solar Retrofit uses the Solar Optimization technique to extract minimum power from the mains and instead use solar energy to the maximum, for example if the battery is charged by only 70% till dusk the Solar Retrofit after analyzing the usage pattern will not charge the battery through the mains but will wait until dawn to do so, hence saving the electricity bill and optimizing the use of ecofriendly solar energy.
LCD Display
A user friendly LCD that displays important information like battery Charging Status, Charging Source, Total units savings etc.
MCB Protection
World class MCB ensures your UPS and connected loads stay protected from short circuits.
Four Stage Charging
The Solar Retrofit supports 4-stage smart charging to ensure fast, safe & efficient charging and longer battery life.
| Products | Retrofits and Charge Controllers |
|---|---|
| Max usable current per MPPT (A) | No |
| Nominal battery bank voltage | No |
| Max usable current from solar (A) | No |
| Usable current from grid (A) | No |
| Grid Connection | No |
| Nominal DC | 96 |
| Max DC Output Current (Amp.) | 50 |
| Product Dimensions (L*W*H) | 375*315*135 |
| No. of 12V Batteries in Series | 8 |
Solar Retrofit is an upgrade of Charge controllers which when connected to any existing UPS converts it into 100% Solar UPS without any change in electrical wiring of existing UPS. It has inbuilt intelligence to maximise use of solar energy to power your appliances.
Function
BRD Series thermal overload relays apply to circuit of AC 50Hz or 60Hz, rated voltage to below 660V and rated current 0.1~93A for AC Motor overload and single phase protection during long time or intermittent longtime service, which can also protect three phase serious imbalance and long starting time of motor or long time operation, can also be used for corresponding AC contactor for electromagnetic starter.
|
Model Name |
protection relay | |
|
Standard |
IEC60947-4-1 | |
|
Setting current multiple |
1.05, 1.2, 1.5, 7.2 | |
|
Rated current In(A) |
25 36 93Amp | |
|
Rated voltage Un(V) |
230V 240V 380V | |
|
Frequency of coil |
50Hz, 60Hz, 50/60Hz | |
|
Number of auxiliary contact |
10 /01 /11 | |
|
Protection grade |
IP20 | |
|
Pollution grade |
3 |
Features
BRD has the innovative, elegant model and small installation area, functions such as temperature compensation, action indication, automatic and manual reset, stop with steady and reliable performance.
n Can be connected with a contactor or installed separately
n Action Characteristics
Overload protection
Phase failure protection
Applicable Working
|
Ambient temperature |
-5~+40℃, the average value cannot exceed to +35℃within 24h | |
|
Altitude |
≤2,000m | |
|
Relative humidity |
≤95% | |
|
Pollution level |
II. | |
|
Installation location |
Mount on the place where has no obvious vibration or impact |
| Name | EATS1 MCB type |
| Max. Current: | 63A |
| Breaking capacity | 3kA |
|
1500 times |
AD22-DFM Digital Frequency/Current/Voltage Meter designed on the base of AD22 LED LED Indicators in this field. It can be used in the Panel Board to showing the rated frequency in the circuit. The AD22-DFM Digital Frequency/Current/Voltage Meter Indicator also can be used to instead of the traditional Panel Meter. This Indicator with the advantage of compact design. It can be easily installed on the panel board.
Reviews
There are no reviews yet.