Product Description
DDS13521A Single-Phase DIN Rail kWh Energy Meter
DDS13521A single-phase DIN rail type energy meter is a new type single-phase full-electronic energy meter developed by our company using microelectronic technology and imported special large-scale integrated circuits, applying digital sampling processing technology and SMT process and other advanced technologies. The performance of this meter fully complies with the relevant technical requirements of the 0.5 or 1 level single-phase energy meter in the national standard of GB/T17215-2002. It can directly and accurately measure the active energy in the single-phase AC power grid with a rated frequency of 50Hz or 60Hz. The mechanical counter shows the total power consumption: it has the characteristics of good reliability, small size, light weight, beautiful appearance and easy installation.
Previous Product
IP66 Enclosure Customized Waterproof JXF Outdoor Distribution Box
Next Product
GV2ME Motor Protector Thermal Magnetic Type MPCB, 3 Phase Motor Protection Circuit Breaker
Related products
-
Sold By: : August Auto Agencies Ltd.The WHA/WHB/WHC series of weatherprotected isolating switches is a robust range of switches suitable for virtually any external application. The impact resistant base and cover will survive the hardest knocks in almost any installation. The two sections are sealed with a co-injection gasket. The range provides ample conduit entries and is suitable for side entry from a vertical duct. Its compact size means it is aesthetically pleasing and suits installations where space is limited such as with residential air conditioning applications
Key Features
- 1 gang Isolating switch
- 1 way, on/off switch
- 8 mm diameter padlocking facility
- M220 rating
- Dimension: 85 mm Height x 165 mm Width x 94 mm Depth
- Cables looped in and out from overhead
- In and out from underground
- In and out straight through the switch
- Cables in through side and out through bottom
- Two 25mm rear knockouts are moulded in the base
-
Sold By: : August Auto Agencies Ltd.Solar Retrofit is an intelligent Charge controller and solar conversion device which when connected to any existing UPS converts it into 100% Solar UPS without any change in electrical wiring of existing UPS.
- Pure Sine Wave Output
- 3 Operation modes: Auto/Manual/100% solar
- MCB Protection
- 4 Stage Battery charging
- LCD Display
Solar Retrofit is an upgrade of Charge controllers which when connected to any existing UPS converts it into 100% Solar UPS without any change in electrical wiring of existing UPS. It has inbuilt intelligence to maximise use of solar energy to power your appliances.
Solar Optimization Technique
Luminous Solar Retrofit uses the Solar Optimization technique to extract minimum power from the mains and instead use solar energy to the maximum, for example if the battery is charged by only 70% till dusk the Solar Retrofit after analyzing the usage pattern will not charge the battery through the mains but will wait until dawn to do so, hence saving the electricity bill and optimizing the use of ecofriendly solar energy.
LCD Display
A user friendly LCD that displays important information like battery Charging Status, Charging Source, Total units savings etc.
MCB Protection
World class MCB ensures your UPS and connected loads stay protected from short circuits.
Four Stage Charging
The Solar Retrofit supports 4-stage smart charging to ensure fast, safe & efficient charging and longer battery life.
Products Retrofits and Charge Controllers Max usable current per MPPT (A) No Nominal battery bank voltage No Max usable current from solar (A) No Usable current from grid (A) No Grid Connection No Nominal DC 96 Max DC Output Current (Amp.) 50 Product Dimensions (L*W*H) 375*315*135 No. of 12V Batteries in Series 8
-
Sold By: : August Auto Agencies Ltd.Luminous Solar Charge controllers are required to fully charge a battery from Solar Panels without permitting overcharge. They prevent reverse current flow at night.
Brief Specification:
- 98% efficiency
- Inbuilt Low volatge disconnect (LVD)
- Automatic battery selection
- USB port for DC load connection
-
Sold By: : August Auto Agencies Ltd.Powers both AC and DC loads from the smart synergy of solar and grid energy
-
Sold By: : August Auto Agencies Ltd.- ★.Inner Size is 3.6 x 3.6 x 2.6 inches (Deep) / 90 x 90 x 65mm;Total Size: 4 x 4 x 2.8 inches (H)/100 x 100 x 70mm
- ★.Electrical Box Made of ABS and Rubber, Sturdy and terrific,sealed, moisture proof, sunscreen, anti-corrosion, durable for years
- ★.A total of 7 holes ,25mm Hole diameter, DIY according to individual needs
- ★.You only need to use an ordinary small screwdriver, you can easily install and disassemble, use very convenient, Easy to operate and repair, no cable cutting, more convenient and safer
- ★.Waterproof Box Perfect for use outdoors, Waterproof junction box means these are well protected from rain and water splash back, making them perfect for joining wires inside.
Reviews
There are no reviews yet.